Skip to product information
1 of 1
Backordered

Item Number: IRC730

Power-Loc - 3/4" Female Hose Starter Fitting

Power-Loc - 3/4" Female Hose Starter Fitting

Start Your Water Distribution Off Your Spigot

Start you 1/2" poly tubing distribution system with this starter fitting if you have a male hose thread (spigot) connection to the water feed. (For female hose thread connection, see IRC745.)

Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.

  • Can be used with pressure up to 60 psi
  • Compatible with pressure compensating emitterline

⚠ Warning: This product or its packaging has a CA Prop 65 Warning

Available to Ship After: 7/26/2024. Order today to reserve yours!
Quantity Discounts for Power-Loc - 3/4" Female Hose Starter Fitting
Buy 5 for $2.99 each
Buy 10 for $2.84 each
$2.99
Satisfaction guaranteed shipping

Check Your Zone Compatibility:

Description

Start you 1/2" poly tubing distribution system with this starter fitting if you have a male hose thread (spigot) connection to the water feed. (For female hose thread connection, see IRC745.)

Insert fitting into the poly tubing, screw down the built-in clamp and the connection is tight and strong. Removing the fitting requires simply unscrewing the clamp and working the tubing off the fitting end.

  • Can be used with pressure up to 60 psi
  • Compatible with pressure compensating emitterline

⚠ Warning: This product or its packaging has a CA Prop 65 Warning

Shipping Information

Shipping Weight: 0.1 lb

Dimensions: 3.25"L x 1.25"W x 1.25"H

Features

  • Hose Thread

Characteristics

Type of Poly Tubing to Use : Use with 1/2" Poly Tubing

Use Instructions

Useful Information

Guarantee

View full details

Customer Reviews

Based on 7 reviews
71%
(5)
29%
(2)
0%
(0)
0%
(0)
0%
(0)
V
Victoria T
Secure and No Leaking

This Power Loc starter has never leaked and remains securely in place.
One time, I ran out of this part when expanding my irrigation and I had to buy a different brand at a local shop nearby. The competing brand leaks no matter what you do to fit it on the spigot. I returned them and bought more of these Power Locs.

H
Hobby Gardener
Excellent product.

Easy to use no fighting to put on the poly tubing.

B
Bob
Great product, not idiot proof

I have to admit I felt pretty dumb after struggling to get this on the emitterline I bought with it. Turns out there are two ways to conceptually install this.
1) You unthread the nut off the PowerLoc and on to the Emitterline, then press on the Emitter line to the barb end of the PowerLoc and attempt to thread the nut again. THIS IS WRONG.
2) Tighten the nut all the way down to the base of the PowerLoc, as if you were tightening it. Then press on the Emitterline and "unthread" the nut towards the Emitterline, it will cinch tight and the Emitterline isn't going to budge.

Wanted to share in the hopes this helps someone

K
KC
Hose End

Essential irrigation part. Be sure to plan out your system because it is easy to forget these small parts!

M
Magilla
Best connectors for poly

these power-loc fittings are easy to work with and tight fitting. Far better than those compression fittings. A little more money, but well worth it.

Carbon-neutral shipping with Shopify Planet
Carbon-neutral shipping on all orders
27,749kg
shipping emissions removed
That's like...
71037
miles driven by an average gasoline-powered car
We fund innovations in...
Soil
Forest
Powered by Shopify Planet